How to install Air Compressor in the Garage

The air compressor can be quite a handy tool to have in the garage. It will always help with the various applications around the house. The question most people have on their mind would be how to install the air compressor in the garage. We get to look at the possible ways that you can follow when it comes to installing the compressor in the garage. You can learn more from http://airtoolresource.com/best-air-compressor-reviews/ thanks to the air compressor reviews.

resource:www.garagejournal.com

Choosing The Compressor

Before you can do the installation, you first need to think about the type of compressor that you want in the garage. Not all the compressors would be great when it comes to the installation process. You might want to look at these best small air compressors list if you’re in doubt. The tank volume is the first thing you have to consider. You can now reduce the load on the motor by getting a tank with a larger capacity.

You still have to keep in mind the amount of air the compressor can push. It is called the cfm rating of the air compressor. You have a value that is great for the various air tools you would be using around the garage. Having an air compressor that produces less cfm than what is required by the air tool will simple make it impossible to use the tool.

Some of the other things to consider when getting yourself the air compressor includes the following:

  • The horsepower
  • PSI
  • The capacity
  • The cost
  • The efficiency
  • The user feedback

Securing the air compressor in position

For you to have an easier way of handling the air compressor, it is important that it is well installed in the garage.

resource:www.secondchancegarage.com

You will start by looking for a kit with a flexible and sturdy ½-inch Puvex hose of about 50 feet, tee fittings, elbows and the straight unions. Such a kit would be great so that you do not have to buy the parts differently.

Proceed to cut a small length of the hose to start the setup. Follow up the hose with a dryer or filter. The dryer is important as with time the oil and condensation will be passed around during the generation of air. If the trier does not absorb them, they can lead to dire effects on the paint job and clump.

If you are going to install the dryer, it should definitely have a shut off valve, regulator, pressure gauge and many other things.

The compressor would be used for many things, so there is the need to use various air lines for the equipment. It is the reason we use the Tee lines from the dryers. We use the galvanized to run the pipes to the equipment that you be using the air for various works.

You have to plan ahead by having a blasting cabinet installed. Or you can still have a tee fitting and a shutoff valve along the wall of where you want the air directed in the future. You can never miss to have the shutoff valve because of the safety reasons. In case of an incident, the valve kicks in to keep you safe from accidents.

The video below will give you more insights on how to end up with the best installation of the air compressor.

As you can see, the installation process should not be hard. Within an hour, you should have finished the installation and now ready to use the compressor. If a compressor is well organized and installed, it is often easy for anyone to troubleshoot it in case there is trouble. It also makes the workstation to be quite presentable and easy to make adjustments whenever necessary.

============================================================

Author Bio:

My name is Philip L. Floyd, a member of air tool resource team, and I love doing DIY projects. . Hopefully my reviews will help you with your next DIY project too

============================================================

Leave a Reply