Site icon Kravelv

DIY Roof Ventilation Tips

Roof ventilation is very important for the long life of the house and its inhabitants. This thing also decreases the cooling bill prices in summer. It increases the life of the shingles and resists mold or rot from growing. Moreover, a good roof ventilation prevents the moisture and winter ice dams also.

However, roof ventilation is essential because it cuts down the consequences that will lead to frequent repairs. For this purpose, you can install roof vents. It’s so easy to install and takes just some hours.

The need of ventilation:

If you have a good ventilation system installed then it is sure that it will decrease the heat buildup. Similarly, it reduces the cooling bills and gives long life to the shingles. This will also cut down the amount of heat and moisture.

You will come to know the need of ventilation when:

All these are the signs that you don’t have a good ventilation system installed. For this, you must do a little hard work.

Ventilation can be achieved by using different techniques and methods as well as products. But before this, you must know that how much ventilation is required on your roof. Moreover, you must consider that how many vents you require for your roof. For this purpose, multiply the length of the roof with the width to determine that area or space.

Install roof and soffit vents:

Install the roof vents near the peak of the roof and soffit vents near the eaves. In this way, air comes in from the soffit vents and goes out from the roof vents. Be sure to install the soffit vents on both sides of the house. If you don’t know how to install these vents then you should ask for a roofing professional to do this for you.

Styles of roof vents:

You will find different styles of vents in the market. Choose the ones that are easy to install like rectangular or hooded roof vents and in the same way rectangular soffit vents.

Air chutes:

Place the air chutes so that the air can move freely between the roof sheathing and the rafters. For installing the air chutes, you need to wear glasses, a mask, and long sleeves.

Install ridge vent:

A ventilated strip that is set along the ridge line of your home. To install this, you have to cut a one-inch strip of roof decking on both the sides of the ridge line for the purpose of air passing through the vent.

Install fans:

You can install fans on your roofing system. This is for the purpose of exhaust and for the movement of the air. There, you will find a thermostat or a switch for the fans that determine the building up of heat in the attic space. It will itself exhaust the attic space. So, installing fans is a great idea.

Installation of gable vents:

In the home or in a building, you can install the gable vents in the gable ends. Through them, the air flows out of the attic space. Moreover, these vents resist the moisture to come in.

Ventilation is an essential thing for a home or a building. Whether it is a home or some other building, the passage of air is necessary for the survival. The system of heating, air conditioning, and the long life of the roof, all depends on the ventilation system. As a matter of fact, you have other options also to install like mushroom vents, louvered dormers, etc. If your roof is damaged and beyond repair then, in that case, you really need to contact professional Roofing contractors in Trenton Michigan for a professional advice.

Exit mobile version